Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
0 Product(s) in cart
Total $0.00
» Checkout

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Vehicles » E-Maxx

 Checkout
ManufacturerSortNumberSearch

« Previous | 1 | 2 | »

Aluminum EMaxx Chassis - VMaxx
Manufacturer: RC Monster

 

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks. The goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were the driving force for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - the bottom of the tray is even with the bottom of the chassis braces, so maximum total ground clearance is unchanged, while center of gravity is significantly lower than stock(or any other chassis that retains stock center ground clearance). The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller straps. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Total weight about 1 oz over the stock chassis weight, with all like components installed(battery holders on stock chassis, trays, screws and straps on my chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining the stock center ground clearance and Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length - stock chassis braces can be used - We recommend our V-Maxx chassis braces(discounted when purchased with the chassis).
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if I get enough requests, I should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Transmission mounts are removable - the separate, bolt-in tranny mounts locate the transmission exactly where it is on the stock truck, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
:
Price: $135.00
164.70 CAD | 86.32 GBP | 120.92 EUR
Add to cart

Front and Rear Combo Bulk

 

  • Strongest design available.
  • Lightweight.
  • Diff case built onto the bulkhead.
  • Extra support for hinge pins.
  • Increased driveline strength.
  • Option parts available.
  • Bulks are machined out of billet 6061 aluminum for durability and strength.
  • Fast Lane’s extreme abuse warranty.
  • Replacement cost per side $15.00.

 

Item may be drop shipped directly from FastLane Machine if not in stock in our facility(up to 3-4 weeks processing time).

 

 

 

 

 

 

 

 

 

  • The design is lighter when compared to other aluminum bulks and diffs. Lightweight is achieved by removing material out of areas were it once was not possible. These are by far the strongest bulkheads available. By machining the diff case onto the bulk, the bulkhead is now bolted together from the side. Instead of held together by the bulk brace, chassis, skid plate and shock tower. Now these items are strengthened by this design. By using this design you can also make other parts significantly lighter, because they are no longer a deciding factor in the strength of the bulkhead. For even lighter weight you can toss out the bulk brace, it will no longer be needed with this design. The Bulkhead has even had a revision with this design. Now the hinge pins have an extra support to resist bending. Driveline strength with design has greatly been increased. With absolutely no movement or flexing of the diff case the gears will not try to separate, greatly increasing the life of your gears. Option parts available for this bulk design. Now even lighter weight shock towers and skid plates.

     

     

     

     

     

     

     

     

     

     

     

  • :
    Price: $120.00
    146.40 CAD | 76.73 GBP | 107.48 EUR
    Add to cart

    Low Cg Emaxx Chassis - Fastlane Machine

     

    We designed this chassis with the idea of keeping the batteries as low as possible.

    Adjustable battery system: will accept nearly any battery available.

    Complete kit: includes everything for an easy swap.

    Item may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to

    weeks for processing).

     This item not eligible for flat rate shipping.

    Price: $104.00
    126.88 CAD | 66.50 GBP | 93.15 EUR
    Add to cart

    T-Maxx/E-Maxx Front Hybrid Bulkhead from FastLane Machine

     

     

     

     

     

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Increases strength to entire bulkhead section
  • This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches)
  • Diff case and bulk are machined into one unit
  • Includes lower arm pin

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

  •  

    Price: $75.00
    91.50 CAD | 47.96 GBP | 67.18 EUR
    Add to cart

    T-Maxx/E-Maxx Rear Hybrid Bulkhead from FastLane Machine

     

     

     

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Increases strength to entire bulkhead section
  • This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches)
  • Diff case and bulk are machined into one unit
  • Includes lower arm pin

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

     

     

  • Price: $75.00
    91.50 CAD | 47.96 GBP | 67.18 EUR
    Add to cart

    Fastlane Maxx Front Bulkhead set

     

    Made from the finest 6061 T6 Aluminum. These Bulkheads are as strong as they are great looking!

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $37.50
    45.75 CAD | 23.98 GBP | 33.59 EUR
    Add to cart

    Fastlane Maxx Rear Bulkhead set

     

    Made from the finest 6061 T6 Aluminum. These Bulkheads are as strong as they are great looking!

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $37.50
    45.75 CAD | 23.98 GBP | 33.59 EUR
    Add to cart

    Fastlane Maxx A-Arm Set, Upper

     

    Made from the finest 6061 T6 Aluminum. These A-Arm sets are very durable and easy to install. These arms are sold in Pairs. 2 are needed to complete the truck.

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $29.00
    35.38 CAD | 18.54 GBP | 25.98 EUR
    Add to cart

    Fastlane Maxx A-Arm Set, Lower

     

    Made from the finest 6061 T6 Aluminum. These A-Arm sets are very durable and easy to install.

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $29.00
    35.38 CAD | 18.54 GBP | 25.98 EUR
    Add to cart

    Fastlane Maxx Adjustable Shock Tower
    Based on 1 ratings. (View)

     

    20 adjustable positions from racing to bashing!


     

    Adjusts an additional .500 than previous design

    • Towers has been machined to accept GS Storm and Hot Bodies Lightning  wing mount

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    Price: $24.00
    29.28 CAD | 15.35 GBP | 21.50 EUR
    Add to cart

    Center Skid, Differential Mount

     

    Offered to complement our V-Maxx chassis concept, this center skid has mount slots to allow direct installation of our universal center diff/motor mount.

    Skid is cnc machined from 6061-T651 billit aluminum for strength, good looks, and durability. Slotted diff mount allows various diff sizes to be accomodated, as well as the ability to make minor position changes(accomodates small range of center shaft sizes as well). 

    Mounts to chassis braces using factory holes for maximum compatibility (minor trimming at rear to work with current factory braces).

    Price: $15.00
    18.30 CAD | 9.59 GBP | 13.44 EUR
    Add to cart

    Maxx Front Skid Plate - From FastLane Machine

     

    Maxx Front Skid Plate - From FastLane Machine

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $14.00
    17.08 CAD | 8.95 GBP | 12.54 EUR
    Add to cart

    FastLane machine maxx hinge pin kit - stock bulks

     

     

     

  • Made in the USA
  • Machined from high strength steel
  • Stock bulk upgrade

     

     

    Item may be drop shipped directly from FastLane Machine if not in stock in our facility.

  • Price: $12.00
    14.64 CAD | 7.67 GBP | 10.75 EUR
    Add to cart

    Maxx Hinge pins - Fastlane Bulks

     

     

     

     

  • Machined from high strength steel
  • Stock upgrade

    14600 option for rpm upper arms(upper pins only) 

     

    Item may be drop shipped directly from FastLane Machine if not in stock in our facility.

     

  • :
    Price: $12.00
    14.64 CAD | 7.67 GBP | 10.75 EUR
    Add to cart

    Maxx Rear Skid Plate - From FastLane Machine

     

    Maxx Rear Skid Plate - From FastLane Machine

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $12.00
    14.64 CAD | 7.67 GBP | 10.75 EUR
    Add to cart

    « Previous | 1 | 2 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase