Stock chassis conversion kit for popular Mugen MBX6 Truggy. Kit includes cnc machined motor mount, single servo/rx plate with integrated transponder and antenna mount, and battery/ESC tray. All items bolt directly onto stock chassis - no modifications required.

Key Features:

All parts cnc machined for perfect "factory"  fit and finish

Retains use of stock chassis, mud guards etc. - simple, effective, bolt-on conversion with factory look, fit, finish and quality.

Custom servo plate allows personal transponders, as well as trackside transponders to mount directly. Has integrated receiver platform with antenna mount. Directly replaces stock CF piece - no modifications.

Integrated/ESC tray in cnc machined from 1 1/4 pound block of plastic for precision fit. Finished tray weighs only 3 ounces, includes accommodations for most or all 1/8 ESC on the market currently, with matching bolt pattern to allow Tekin RX8 and Castle MMM(with Traxxas esc mount - #5626) to bolt directly to tray. CNC Milled underside allows ESC wires to be routed under tray, resulting in a super clean, easy to remove and easy to service installation. Battery tray allows nearly all available packs to be used - 51.5mm x 169mm inner tray dimensions.

Entire electronics can be removed from chassis kit by simply removing 12-14 screws(depending on if motor or entire center diff/motor are removed) - nothing needs to be unplugged, unsoldered or adjusted. Unique feature allows quick and easy cleaning and maintenance with no adjustments necessary - entire center section including the servo, esc, motor and center diff can be removed or installed in under 2 minutes. 

All components promote super low Cg for optimum handling.  Weight balance optimized with the stock chassis configuration for predictable and responsive handling characteristics.

Light weight components - entire kit weighs only 5oz and replaces over 11oz of original components(excluding brake servo and rx battery!). Complete truck in ready to run form with body weighs only 9 pounds 8oz.! (Tekin truggy combo, 5s 4000mah battery, AKA cityblock premount tires, Hitec 7955Tg servo used for weight computation).

Slipperential (Patent Pending) and optional components and/or electronics shown are available separately but not included with kit - requires Mugen MBX6T kit for conversion.

1 piece motor mount and single servo tray/rx mount for Ofna Jammin' X1 CRT truck.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

New design removes weight and allows use of mechanical brakes(gearing may be limited).

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Electric motor mount for SX8 buggy by TQ racing. replaces rear center diff bulkhead and allows easy install of electric motor with 25mm or 1 inch hole spacing. new design allows m3 or m4 screws to be used and motors can be quickly and easily installed and adjusted with a single screw.

Includes:

1 - motor mount

1 - lower swivel bushing

1 - M3 washer (used only with M3 screw installation)

1 - M4 button head screw (used only with M4 screw installation)

2 - M3 button head screws for motor mount top

Measuring recorder Black Box BB_03 is an outstanding and unique system which is priceless and irreplaceable for optimal setting of your power unit and for an overall optimal drive setting (including batteries, controller, motor and propeller).

BB_03 cooperates very closely with speed controllers of range Z-series from which it obtains whole range of measured data. Part of the measured data is acquired using its own measuring unit. Thanks to this cooperation BB_03 is very small, light (> 6 grams) and also cheap.

It measures and saves all important data of your drive (batteries - controller - motor - propeller) during flight, thus real values in operation, not static values measured on a test bench. This allows the user not only to optimize the power unit but also to determine mutual dependencies such as dependence of current on propeller, efficiency of drive on propeller, efficiency of timing, real power consumption of the drive, power consumption depending on type of cells (their hardness), etc.

It is a powerful device for determining the real load of BEC during operation of the model (it is the end of absurd evaluations with 300% error leading to destruction of BEC or the model).

After the flight the saved data are transferred to PC using USBCOM module, where they can be evaluated. Data are represented in graphs, as well as in excel tables which may be further processed.

BB_03 together with controllers of range Z-series measures and saves each 100ms these values:
• voltage of the feeding (main) battery
• voltage of feeding battery under load (in current pulses)
• current drawn from the feeding battery
• voltage of BEC
• current of BEC
• motor revolutions
• throttle stick position
• temperature of the controller
• temperature of batteries, motor, … (external sensor)
• any receiver channel (or event marking)
• external voltage (5V) with an additional resistor 24kW, voltage 25V with different resistor or more

Other features:
• accidental overwriting of saved data protection
• length of recording more than 16 minutes
• very small and light
• fed from controller
• communication with PC using USBCOM module

Measurement of the following data are carried out by the controller, the other ones are measured by BB_03 itself and all data are processed in BB_03:
• voltage of the feeding battery
• voltage of feeding battery under load (in current pulses)
• voltage of BEC
• current of BEC
• motor revolutions
• throttle stick position
• temperature of the controller

The BB_03 is connected with the controller using multicore cable CC_01 with micro connectors. The cable provides the BB_03 feeding, as well as communication between BB_03 and the controller.

The measuring and data saving process start when the motor starts to rotate after switch on or when marking signal > 1.65 ms. If you do not wish to use the marking feature, connect this measuring wire with ground (minus pole of the feeding cells). It is also possible to use this wire for tracking and recording of any receiver channel.

The current of the feeding batteries is taken on the resistor of the ground wire of the controller. This measuring method, even though less accurate than the use of accurate sensing resistor, is not only cheaper, but more significantly it does not bring any additional (unwanted) resistor in the circuit. Another great advantage is that the value of the measured current is not limited (e.g. by the sensing resistor, its allowed load, ADC range, etc.) thus it is possible to measure current of 250A or even more.

The package includes:
• The measuring unit BB_03
• Connection cable controller - BB (CC_01)
• Cable for connection to USBCOM (CC_02)
• Measuring cable includes:
  • External temperature sensor
  • External voltage conductor
  • Marking conductor
  • Conductors of batteries current (current sensing)
• Resistor 24kW for extending the measuring range of the "ext. voltage"
• SW for PC
• Instructions for connecting and use of BB_03
• Instructions for installation and use of SW for PC

TRAXXAS PART # TRA5626

Electric Speed Control

Hold Down Bracket Mounting Plate

(Castle Creations Mamba Monster Brushless System)