Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
0 Product(s) in cart
Total $0.00
» Checkout

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Traxxas Trucks » E-MAXX » All Products

 Checkout
SortNumberSearch

« Previous | 1 | 2 | »

Aluminum EMaxx Chassis - VMaxx
Manufacturer: RC Monster

 

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks. The goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were the driving force for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - maximum total ground clearance is achieved, while center of gravity is significantly lower than stock. The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller straps. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Nearly identical to the stock chassis weight with all like components installed(battery holders on stock chassis, trays, screws and straps on V-Maxx chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining high center ground clearance and the legendary Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length -  chassis braces included with the chassis.
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if we get enough requests, we should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Removable transmission mounts - the separate, bolt-in tranny mounts locate the transmission exactly where it is on the stock truck, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
:
Price: $160.00
212.34 CAD | 103.95 GBP | 142.00 EUR
Add to cart

E-Maxx 3905/3908 Extended Chassis - Updated Design
Manufacturer: Fastlane Machine
Based on 3 ratings. (View)

 

E-Maxx 3905 Extended Chassis 

Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 4 weeks for processing).

This item not eligible for flat rate shipping.

 

 

 

 

 

  • Machined out of billet 6061 aluminum
  • 4 point chassis brace
  • Front and Rear Driveshafts
  • Multiple battery pack options
  •  

     

     

     

     

    Price: $104.00
    138.02 CAD | 67.57 GBP | 92.30 EUR
    Add to cart

    Aluminum Transmission Case For Emaxx 3903, Emaxx 3905, Emaxx 3908, Erevo 5605 & Erevo 5608

     

    Aluminum Transmission Case For Emaxx 3903, Emaxx 3905, Emaxx 3908, Erevo 5605 & Erevo 5608

    This case replaces Traxxas Part #3991X. This case is compatible with Emaxx models 3903, 3905, 3908. (Not compatible with Emaxx 3906) This case is also compatible with eRevo (TRA5608 and TRA5605).

     

    Price: $90.00
    119.44 CAD | 58.47 GBP | 79.88 EUR
    Add to cart

    "V-Stretch" Maxx Chassis Extension

     

    Since the release of our popular V-Maxx chassis for the Emaxx, we have worked to add value with accessories and hop-ups that complement our design concept. For years we have fielded requests for a Maxx chassis extension and our V-Maxx chassis was the perfect platform to launch such a product.

    For those looking for a little extra length in their Maxx trucks, we have developed our new V-Stretch modular chassis extension. The 35mm or 50mm additional length is built off custom rear skid plates, connecting seamlessly to the chassis braces for factory looks and superior strength. The lower skid can be replaced separately, allowing harsh use without fear of ruining the part - beat it up and simply replace the skid. The V-Braces fuse the skid into the upper chassis plate and rear bulkhead through the top extension plate for a solid, light-weight and attractive setup that flows with our V-Maxx chassis lines and general design concept - once installed it looks like part of the chassis, rather than an afterthought. The wide space between the V-Braces allows much easier shaft installation vs previous chassis extension concepts, providing superior access and minimal interference.

    35mm Extension weighs only 2.6 oz, while the 50mm weighs 3.2oz (including the skid - adds under 2oz total weight) and extends the wheelbase to approximately 14.5"(35mm) or 15.25"(50mm). Compatible with any Maxx vehicle that uses stock-style skids and bulks. Requires longer rear center drive-shaft. 

    :
    Price: $45.00
    59.72 CAD | 29.24 GBP | 39.94 EUR
    Add to cart

    Fastlane Maxx Front Bulkhead set

     

    Made from the finest 6061 T6 Aluminum. These Bulkheads are as strong as they are great looking!

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $37.50
    49.77 CAD | 24.36 GBP | 33.28 EUR
    Add to cart

    Fastlane Maxx Rear Bulkhead set

     

    Made from the finest 6061 T6 Aluminum. These Bulkheads are as strong as they are great looking!

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $37.50
    49.77 CAD | 24.36 GBP | 33.28 EUR
    Add to cart

    Traxxas Differential Kit E-Revo

     

            This is the Differential Kit for the Traxxas E-Revo and E-Maxx.
     


    FEATURES: Direct drop-in for E-Revo and E-Maxx
              Transfers power to the front and rear differentials independently
              Comes assembled with 500K oil
              For single speed transmission only
     


    INCLUDES: One differential kit
     


    REQUIRES: Installation on E-Revo or E-Maxx
     

    Price: $34.99
    46.44 CAD | 22.73 GBP | 31.05 EUR
    Notify when back in stock

    Fastlane Maxx A-Arm Set, Upper

     

    Made from the finest 6061 T6 Aluminum. These A-Arm sets are very durable and easy to install. These arms are sold in Pairs. 2 are needed to complete the truck.

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $29.00
    38.49 CAD | 18.84 GBP | 25.74 EUR
    Add to cart

    Fastlane Maxx A-Arm Set, Lower

     

    Made from the finest 6061 T6 Aluminum. These A-Arm sets are very durable and easy to install.

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $29.00
    38.49 CAD | 18.84 GBP | 25.74 EUR
    Add to cart

    Integy Aluminum diff case

     

    Alloy Gear Box for E/T-Maxx This is a must have item if you plan on running serious power through your truck. Eliminate stripped ring gears by using this lightweight, strong diff case. The gears mesh perfectly and the diff case flex is gone! For original Maxx trucks only(not compatible with newer Revo-style diffs).

    :
    List Price: $25.99
    You save $1.00
    Price: $24.99
    33.16 CAD | 16.24 GBP | 22.18 EUR
    Notify when back in stock

    Fastlane Maxx Adjustable Shock Tower
    Based on 1 ratings. (View)

     

    20 adjustable positions from racing to bashing!


     

    Adjusts an additional .500 than previous design

    • Towers has been machined to accept GS Storm and Hot Bodies Lightning  wing mount

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    Price: $24.00
    31.85 CAD | 15.59 GBP | 21.30 EUR
    Add to cart

    Maxx Adjustable Shock Tower V2

     

    Low profile shock tower for T-Maxx and E-Maxx trucks.

    Offers high strength and low stance, while retaining optimum shock position adjustments. Gen 2 design offers 18 shock positions per side to allow raising the truck for bashing and big jumps, or lowering the truck for optimum race stance. Also allows longer or shorter shocks to be used. Design features extra body post mounting hole and allows lower body position - ideal for optimum battery coverage, particularly with low cg chassis configurations. Accepts Hot Bodies Lightning, HPI Trophy/Truggy/Buggy or Mugen wing mount.

     

    Price: $24.00
    31.85 CAD | 15.59 GBP | 21.30 EUR
    Add to cart

    Maxx Bulkhead Braces (Front & Rear) - From FastLane Machine

     

    Maxx Bulkhead Braces (Front & Rear) - From FastLane Machine

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $18.00
    23.89 CAD | 11.69 GBP | 15.98 EUR
    Add to cart

    3905/3908 Brushless Motor Mount
    Manufacturer: Fastlane Machine

     

     

     

     

     

     

     

     

  • Made in the USA
  • Machined from billet 6061 aluminum
  • Single motor mount

     

    Item may be drop shipped separately if not in stock at our facility.

     

     

     

     

     

     

  • Price: $15.00
    19.91 CAD | 9.75 GBP | 13.31 EUR
    Add to cart

    « Previous | 1 | 2 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase