Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Chassis

 Checkout
SortNumberSearch

« Previous | 1 | 2 | »

Fastlane Rustler Super Chassis Kit
Manufacturer: Fastlane Machine
Based on 1 ratings. (View)

 

Fast Lane Machine Complete  Rustler Chassis Kit.

Compatible with new VXL kits.

Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

This item not eligible for flat rate shipping.

Price: $160.00
209.71 CAD | 122.18 GBP | 145.26 EUR
Add to cart

Fastlane Stampede/Rustler Super Extended Chassis Kit
Manufacturer: Fastlane Machine
Based on 1 ratings. (View)

 

Fast Lane Machine Complete Stampede or Rustler Extended Chassis Kit. This chassis kit is 1" longer than stock.

Compatible with new VXL vehicles!

Item may be drop shipped if not in stock - may take up to 2 weeks for drop ships during peak periods.

This item not eligible for flat rate shipping.

Price: $150.00
196.61 CAD | 114.54 GBP | 136.19 EUR
Add to cart

Aluminum EMaxx Chassis - VMaxx
Manufacturer: RC Monster

 

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks.  As the first offering for our "Victory" series, the goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were driving forces for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - maximum total ground clearance is achieved, while center of gravity is significantly lower than stock. The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller packs. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Nearly identical to the stock chassis weight with all like components installed(battery holders on stock chassis, trays, screws and straps on V-Maxx chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining high center ground clearance and the legendary Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length -  chassis braces included with the chassis.
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if we get enough requests, we should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Removable transmission mounts - the separate, bolt-in tranny mounts locate the transmission in its stock location, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
Price: $150.00
196.61 CAD | 114.54 GBP | 136.19 EUR
Add to cart

Electric conversion Kit - Inferno Gt2

 

Bolt on conversion Kit for Inferno GT2 1/8 road car from Kyosho.

Includes: double servo tray, battery/ESC tray, 2 speed adapter, 1st speed gear, 2nd speed gear and motor mount.

Features:

All parts install directly to stock chassis - no holes to drill

2 speed gears fit threaded adapter - can easily change gearing to accomodate GT2 or new Kyosho 2 speed transmission

Battery/ESC tray accomodates most packs on the market. ESC shelf allows direct installation of Tekin RX8 ESC, or castle Creations mamba monster(with Traxxas ERevo ESC holder)

Motor Mount allows m4 or m3 mount screws - new swivel design allows single-screw gear mesh adjustments

2000Kv motor with 4s with mild gearing(17/23 with IGT2)will outperform Nitro car - 5s, 6s, etc. or larger gearing can easily exceed 100mph performance!

This item not eligible for flat rate shipping.

Price: $115.00
150.73 CAD | 87.81 GBP | 104.41 EUR
Add to cart

Low Cg Emaxx Chassis - Fastlane Machine

 

We designed this chassis with the idea of keeping the batteries as low as possible.

Adjustable battery system: will accept nearly any battery available.

Complete kit: includes everything for an easy swap.

Item may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to

weeks for processing).

 This item not eligible for flat rate shipping.

Price: $104.00
136.31 CAD | 79.41 GBP | 94.42 EUR
Add to cart

Electric Conversion Kit - Durango DNX408
Based on 2 ratings. (View)

 

Stock chassis conversion kit for Team Durango nitro DNX408 buggy. Kit includes cnc machined 2 piece motor mount, front center bulk top, Servo/rx box and battery/ESC tray. Includes screws for motor mounting(M3 and/or M4), spacer and extended screw for steering linkage, and new radio box lower plate. All items bolt directly onto stock chassis - no modifications required.

Key Features:

All parts cnc machined for perfect "factory"  fit and finish

Retains use of stock chassis, mud guards etc. - simple, effective, bolt-on conversion with factory look, fit, finish and quality.

Integrated battery/ESC tray  cnc machined from over 1 pound block of plastic for precision fit. Finished tray weighs less than 3 ounces, includes accommodations for most or all 1/8 ESC on the market currently, with matching bolt pattern to allow Tekin RX8 and Castle MMM(with Traxxas esc mount - #5626) to bolt directly to tray. CNC Milled underside allows ESC wires to be routed under tray, resulting in a super clean, easy to remove and easy to service installation. Battery tray allows most available packs to be used - 50mm x 163mm inner tray dimensions.

Entire electronics can be removed from chassis kit by simply removing less than 10 screws - nothing needs to be unplugged or unsoldered. Unique feature allows quick and easy cleaning and maintenance - entire center section including the servo, esc, motor and center diff can be removed or installed in under 2 minutes. 

All components promote super low Cg for optimum handling.  Weight balance optimized with the stock chassis configuration for predictable and responsive handling characteristics.

Light weight components - entire kit weighs under 6oz !

Our Slipperential (Patent Pending) center diff is compatible with this kit 

Price: $100.00
131.07 CAD | 76.36 GBP | 90.79 EUR
Add to cart

7075 120T F&R ROCKER ARMS W/BEARINGS x 8, REVO.
7075 120T F&R ROCKER ARMS W/BEARINGS x 8, REVO.
 
Price: $100.00
131.07 CAD | 76.36 GBP | 90.79 EUR
Add to cart

Electric conversion Kit - JQ Concepts "The Car"
Based on 4 ratings. (View)

 

Electric conversion kit for  Kit is completely "bolt on" with only minor modifications required(radio plate must be trimmed). Includes motor mount, matching front bulk, adjustable top plate, and hardened Mod1 pinion gear.

Key Features:

All parts cnc machined for perfect "factory"  fit and finish

Retains use of stock chassis, mud guards etc. - simple, effective, bolt-on conversion with factory look, fit, finish and quality.

Integrated battery/ESC tray  cnc machined from 1 1/4 pound block of plastic for precision fit. Finished tray weighs only 3 ounces, includes accommodations for most or all 1/8 ESC on the market currently, with matching bolt pattern to allow Tekin RX8 and Castle MMM(with Traxxas esc mount - #5626) to bolt directly to tray. CNC Milled underside allows ESC wires to be routed under tray, resulting in a super clean, easy to remove and easy to service installation. Battery tray allows most available packs to be used - 52mm x 150mm inner tray dimensions.

Entire electronics can be removed from chassis kit by simply removing a few screws - nothing needs to be unplugged, unsoldered or adjusted. Unique feature allows quick and easy cleaning and maintenance with no adjustments necessary - entire center section including the servo, esc, motor and center diff can be removed or installed in under 2 minutes. 

All components promote super low Cg for optimum handling.  Weight balance optimized with the stock chassis configuration for predictable and responsive handling characteristics.

Light weight components - entire kit weighs only 5oz !

Motor and optional components and/or electronics shown are available separately but not included with kit - requires JQ Concepts "The Car" Buggy kit for conversion.

Price: $95.00
124.52 CAD | 72.54 GBP | 86.25 EUR
Add to cart

ELECTRIC  CONVERSION  KIT - TAMIYA TRF801 Truggy
Based on 7 ratings. (View)

 

All parts cnc machined for perfect "factory"  fit and finish

Retains use of stock chassis, mud guards etc. - simple, effective, bolt-on conversion with factory look, fit, finish and quality.

Custom servo/rx box directly replaces stock piece - no modifications.

Integrated battery/ESC tray  cnc machined from 1 1/4 pound block of plastic for precision fit. Finished tray weighs under 4 ounces, includes accommodations for most or all 1/8 ESC on the market currently, with matching bolt pattern to allow Tekin RX8 and Castle MMM(with Traxxas esc mount - #5626) to bolt directly to tray. CNC Milled underside allows ESC wires to be routed under tray, resulting in a super clean, easy to remove and easy to service installation. Battery tray allows most available packs to be used - 55mm x 150mm inner tray dimensions.

Entire electronics can be removed from chassis kit by simply removing +/-10 screws - nothing needs to be unplugged, unsoldered or adjusted. Unique feature allows quick and easy cleaning and maintenance with no adjustments necessary - entire center section including the servo, esc, motor and center diff can be removed or installed in under 2 minutes. 

All components promote super low Cg for optimum handling.  Weight balance optimized with the stock chassis configuration for predictable and responsive handling characteristics.

Light weight components - entire kit weighs under 7 ounces and replaces over 12oz of original components(excluding brake servo and rx battery!).

Motor and optional components and/or electronics shown are available separately but not included with kit - requires Tamiya TRF801 truggy kit for conversion.

Price: $95.00
124.52 CAD | 72.54 GBP | 86.25 EUR
Add to cart

CNC aluminum Chassis for the electric Rustler
Manufacturer: Fastlane Machine
Based on 1 ratings. (View)

 

This chassis was designed to increase strength over the stock chassis. We accomplished that and still kept it as light as the stock plastic chassis.

One strap battery mounting system. We machined a pocket in the chassis to contain the battery and then machined slots for a cinching strap to keep the battery held in place. Includes front skid plate.

Rigid design.

Custom look.

The extended chassis has been stretched 25.4mm to increase handling performance.

Item may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks to ship from FastLane). This item not eligible for flat rate shipping.

Price: $60.00
78.64 CAD | 45.82 GBP | 54.47 EUR
Add to cart

FastLane Machine Extended HD Flux TVP

 

 

 

 

 

 

 

 

 

 

 

 

  •  We extended the chassis at the rear behind the tranny. We did this to try and keep some weight to the front.
  • Beefy design we designed extra material in any weak spots
  • Kit includes left and right tvp and rear driveshaft

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    This item not eligible for flat rate shipping.

     

     

     

     

     

     

     

     

     

     

  •  

     

     

     

     

     

     

     

     

    Price: $57.00
    74.71 CAD | 43.53 GBP | 51.75 EUR
    Add to cart

    Fastlane Stampede Super Extended Chassis
    Manufacturer: Fastlane Machine

     

    Fast Lane Machine Complete Stampede Extended Chassis. This chassis kit is 1" longer than stock for better handling.

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    This item not eligible for flat rate shipping.

     

    Price: $47.00
    61.60 CAD | 35.89 GBP | 42.67 EUR
    Notify when back in stock

    "V-Stretch" Maxx Chassis Extension

     

    Since the release of our popular V-Maxx chassis for the Emaxx, we have worked to add value with accessories and hop-ups that complement our design concept. For years we have fielded requests for a Maxx chassis extension and our V-Maxx chassis was the perfect platform to launch such a product.

    For those looking for a little extra length in their Maxx trucks, we have developed our new V-Stretch modular chassis extension. The 35mm or 50mm additional length is built off custom rear skid plates, connecting seamlessly to the chassis braces for factory looks and superior strength. The lower skid can be replaced separately, allowing harsh use without fear of ruining the part - beat it up and simply replace the skid. The V-Braces fuse the skid into the upper chassis plate and rear bulkhead through the top extension plate for a solid, light-weight and attractive setup that flows with our V-Maxx chassis lines and general design concept - once installed it looks like part of the chassis, rather than an afterthought. The wide space between the V-Braces allows much easier shaft installation vs previous chassis extension concepts, providing superior access and minimal interference.

    35mm Extension weighs only 2.6 oz, while the 50mm weighs 3.2oz (including the skid - adds under 2oz total weight) and extends the wheelbase to approximately 14.5"(35mm) or 15.25"(50mm). Compatible with any Maxx vehicle that uses stock-style skids and bulks. Requires longer rear center drive-shaft. 

    Price: $45.00
    58.98 CAD | 34.36 GBP | 40.86 EUR
    Add to cart

    Electric Motor Mount - Losi Muggy/Sportwerks Mayhem
    Based on 1 ratings. (View)

     

    Electric Motor Mount for Losi Muggy and Sportwerks buggy.

    Price: $45.00
    58.98 CAD | 34.36 GBP | 40.86 EUR
    Add to cart

    « Previous | 1 | 2 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase