Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
0 Product(s) in cart
Total $0.00
» Checkout

 

Traxxas

 

 

 

Integy

 

Fast Lane Machine

 

RD Logic

 

 

Castle Creations

 

Strobe RC

 

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Controllers

 Checkout
SortNumberSearch

« Previous | 1 | 2 | »

Castle Creations Mamba XL2 1/5 Brushless(V2 ESC)
Based on 1 ratings. (View)

 

Brawn and Brains.

It's time for 1/5th scale buggies, trucks and on road cars to experience the incredible torque and speed of Castle electric drive. The new Mamba XL is the only controller on the market able to handle the loads required to power these surprisingly heavy vehicles to insane speeds.

We can prove it too, as the Mamba XLV2 features all of the standard Mamba series programming features PLUS a first for the RC car market, data logging. Use the data from the controller to measure parameters such as your battery volts, battery ripple voltage, amp draw, motor rpm, and controller temperature. This is a great way to make sure that the rest of your setup is performing within its limits!

:
Price: $625.00
688.06 CAD | 371.81 GBP | 451.13 EUR
Notify when back in stock

Castle Mamba Monster Combos
Based on 2 ratings. (View)

 

The Monster is finally here!

Long rumored, occasionally seen at trade shows, Castle’s elusive 1/8th scale Monster Brushless ESC is finally available to the public. Castle has used all of their tricks to deliver stunning power for monster trucks and 1/8th buggy conversions.
 

The Monster handles up to 6S LIPO input (25.2 Volts MAX). It has a switching BEC circuit onboard to provide plenty of power for your receiver and servos. Don’t worry about the amp rating, nothing even comes close to the real world performance of the Castle controllers, and Monster is no exception. We’ve hit 60 mph with RC vehicles that have absolutely no business doing 60 mph. (And we were doing it in a 20 mph zone!)
 

Monster is designed to keep its cool while it pounds your truck. Castle refused to cut corners on the design or the components, the electronic and thermodynamic fundamentals are right to begin with. Castle then wrings a bit more power out by using a high efficiency heat sink PLUS an integrated cooling fan to make sure you finish the race. Thermals are for the other guys.
 

Monster ESCs come with huge 6.5mm gold plated bullet connectors for reliable power transfer and simple installation. We’ve even thrown in a USB adapter so you can tame the Monster by adjusting the really useful settings using your Windows PC.
 

OK, so you’re asking, “What motor do I run it with, where’s the Castle motor for this thing?”

They are on the way, honest! The long wait is nearly over. You don’t want to know how many prototype motors we’ve tortured in the testing of this Monster. The work has all paid off with these incredible motors. Based on Steve Neu’s awesome 15 series motor, the Neu Castle 2200 and 2650 are works of mechanical art. They both feature high quality bearings and Neodymium magnets, superior electromagnetic design, and rigorous engineering control in our own factory result in a Monster motor we can put our name on.
 

Two choices are on the way.

2650 KV – Intended for 4S (16.8 Volt) operation. Ideal for 1/8th conversions. The 2650 is 67mm long.

2200 KV – Intended for 6S (25.2 Volt) operation. Incredible in monster trucks with up to 6S lipo packs. The 2200 is 75mm long. This is the bad boy!

Both motors come with a Neo rotor on a 5mm shaft as standard, not as an optional upgrade. Castle uses high end bearings for trouble free operation, and we’ve machined integrated cooling fins for that extra bit of power. These motors are 4 pole, slotted, brushless motors wound with 1 turn in a Y configuration. 
 

"Motor or esc only "selections will not include box(every other one of course).

:
Price: $299.00
329.17 CAD | 177.88 GBP | 215.82 EUR
Add to cart

Tekin RS Pro sensored and sensorless ESC

 

The Tekin RS brushless speed control is the next generation in intelligent operating motor drive technology. Designed with nothing but performance in mind and made with the industry’s finest components. The RS delivers what racers require; reliability, precise control and unmatched power handling capability. The RS drives Brushless Sensored, Brushless Sensorless and Brushed motors and can be matched with Lipo, NiMH or NiCd batteries.

Features:
 

  • Easily Access All Programming, Anywhere, Anytime
  • Drives Sensor/Sensorless Brushless and Brushed Motors
  • On-Board Temperature Indicator
  • PC Interface for Custom Programming
  • HDAC: High Density Copper Fet Boards
  • Sensor Plug for Precise Commutation with all Motors
  • Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Adjustable Drag Brakes
  • IO Motor Drive Technology
  • RS-232 Digital Communications Protocol
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ One-Touch Programming
  • One-Touch Radio Calibration
  • LCD: Lightweight Chassis Design

Specifications:

Controls: Forward/Brake/Reverse
ON Resistance: 0.00005 Ohms brushed fwd mode, 0.00015 Ohms brushless mode, 0.00015 brushed fwd/reverse mode
Input Voltage: 4-9 Cells, 3S Lipo
BEC: 6.0V/3.0A
Motor Limit: None
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .60" (33 x 25.4 x 15.25mm)
Weight: 2.3oz with included 12G wiring
 

Price: $224.99
247.69 CAD | 133.85 GBP | 162.40 EUR
Add to cart

Tekin R1 Pro Forward/Reverse Brushed/Brushless ESC

 

Price: $199.99
220.17 CAD | 118.97 GBP | 144.35 EUR
Notify when back in stock

Tekin RS Sensored/Sensorless Brushed/Brushless ESC

 

The Tekin RS brushless speed control is the next generation in intelligent operating motor drive technology. Designed with nothing but performance in mind and made with the industry’s finest components. The RS delivers what racers require; reliability, precise control and unmatched power handling capability. The RS drives Brushless Sensored, Brushless Sensorless and Brushed motors and can be matched with Lipo, NiMH or NiCd batteries.

Features:

 

  • Easily Access All Programming, Anywhere, Anytime
  • Drives Sensor/Sensorless Brushless and Brushed Motors
  • On-Board Temperature Indicator
  • PC Interface for Custom Programming
  • HDAC: High Density Copper Fet Boards
  • Sensor Plug for Precise Commutation with all Motors
  • Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Adjustable Drag Brakes
  • IO Motor Drive Technology
  • RS-232 Digital Communications Protocol
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ One-Touch Programming
  • One-Touch Radio Calibration
  • LCD: Lightweight Chassis Design



RS Specifications:

Controls: Forward/Brake/Reverse
ON Resistance: 0.0001 Ohms brushed fwd mode, 0.0003 Ohms brushless mode, 0.0003 Ohms brushed fwd/rev mode
Input Voltage: 4-9 Cells, 3S Lipo
BEC: 6.0V/3.0A
Motor Limit Brushless Mode: 5 Turn, 36mm can
Motor Limit Brushed Fwd Only Mode: None
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .45" (33 x 25.4 x 11.5mm)
Weight: 2.0oz with included 12G wiring
 

Price: $179.99
198.15 CAD | 107.08 GBP | 129.92 EUR
Add to cart

Castle Creations Mamba Max Pro motor/esc combo

 

New Mamba Max Pro 1/10th Sensored & Sensorless ESC: Castle is Ready to ROAR

Castle, the leader in brushless technology for RC cars, is pleased to announce the release of our new Mamba Max Pro brushless ESC featuring SMARTSENSE™ operation. SMARTSENSE brings the best of sensored and sensorless ESC together to create the ideal controller for serious 1/10th scale enthusiasts. Operating at up to 6S, Mamba Max Pro can handle nearly twice the power of the market standard Mamba Max!

Castle Builds A Sensorless Controller?
Hey, we’re never going to just go with the flow, so we’ve built the best of both worlds into the new controller.

  • SmartSense uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency. Simply put, you’ll get more power and less heat from your motor.
  • Sensored Only mode runs sensored motors using sensored timing only.
  • CHEAT MODE, Castle’s High Energy Advanced Timing allows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield just that extra bit of power needed to win the race. Be careful – there’s never a free lunch, extra power comes with extra motor heat!

OK, now I’m confused. Is Sensored better than Sensorless?
The answer is that for most users, Sensorless operation is still better.

  • Castle’s Sensorless controllers offer best in class start up and braking which are fine for most users. Sensored only motor operation cannot deliver maximum efficiency.
  • Sensors are terribly inaccurate for motor timing purposes as the motor’s magnetic fields change under load or at speed; that’s where Sensorless operation shines.
  • Sensorless is also just more dependable. There are fewer wires and connections that need to survive the incredibly rough treatment most RC cars and trucks endure.

Some guys do need sensored operation, mainly because the racing world’s rules require it, but also because it can offer slightly better start up and braking performance. Mamba Max Pro offers the ultimate in flexibility: use it with all your 1/10th motors, sensored or sensorless!

I’m over the shock of the sensor port. Tell me what else you’ve packed into the Mamba Max Pro.

  • 6S (25.2 volts) max input voltage
     
  • Switching BEC powers your radio and servo all the way up to the 6S max input. Users may select the output for any voltage between 5V and 7V.
     
  • Durable case and cooling fan to protect and cool the controller during hard off-road action
     
  • Ready to Run: Mamba Max Pro is ready to run out of the box.
     
  • Castle Link Compatible: Like all Castle controllers, the Mamba Max Pro may also be “tuned” for the drivers’ preferences in the throttle curve, brake strength, reversing modes and more. Access these features with the CASTLE LINK USB connector (available separately) and a PC for even more versatility.

Mamba Max Pro is available individually or in combos with Castle’s top quality CM36 4600kv, 5700kv, 6900kv, 7700kv, or 9000kv 36mm brushless motors.

Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

:
Price: $169.99
187.14 CAD | 101.13 GBP | 122.70 EUR
Add to cart

Castle Creations Mamba Monster controller

 

 

 

 

 

  • Up to 6S LiPo (25V) input
  • Switching BEC on board so you can use the BEC even with the 25V input
  • HUGE 6.5 mm gold plated connectors look great and really serve a purpose - they handle all that power!
  • Built-in cooling fan helps keep the Monster cool when he's working hard to shred your truck. 

     

    Retail Price:

    Mamba Monster ESC: $199.00

    Cells: 18 NiCad/NiMH
    6s LiPo
    Continuous: More than you can handle!
    Resistance: 0.0003 ohms per phase
    Brake: Proportional with adjustable curve
    Reversible: Yes - with lockout
    Low Voltage Cutoff: Programmable
    Size: ESC: 2.2" x 1.9" x 1.4"
     
    Weight w/wires: ESC: TBD
    Connector Type: 6.5mm bullet

     

     

     

  • List Price: $199.95
    Price: $149.99
    165.12 CAD | 89.23 GBP | 108.26 EUR
    Add to cart

    New Mamba Max Pro 1/10th Sensored & Sensorless ESC

     

    New Mamba Max Pro 1/10th Sensored & Sensorless ESC: Castle is Ready to ROAR

    Castle, the leader in brushless technology for RC cars, is pleased to announce the release of our new Mamba Max Pro brushless ESC featuring SMARTSENSE™ operation. SMARTSENSE brings the best of sensored and sensorless ESC together to create the ideal controller for serious 1/10th scale enthusiasts. Operating at up to 6S, Mamba Max Pro can handle nearly twice the power of the market standard Mamba Max!

    Castle Builds A Sensorless Controller?
    Hey, we’re never going to just go with the flow, so we’ve built the best of both worlds into the new controller.
     

    • SmartSense uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency. Simply put, you’ll get more power and less heat from your motor.
       
    • Sensored Only mode runs sensored motors using sensored timing only.
       
    • CHEAT MODE, Castle’s High Energy Advanced Timing allows users to electronically advance their sensored motor’s timing to extreme settings. This can often yield just that extra bit of power needed to win the race. Be careful – there’s never a free lunch, extra power comes with extra motor heat!

    OK, now I’m confused. Is Sensored better than Sensorless?
    The answer is that for most users, Sensorless operation is still better.
     

    • Castle’s Sensorless controllers offer best in class start up and braking which are fine for most users. Sensored only motor operation cannot deliver maximum efficiency.
       
    • Sensors are terribly inaccurate for motor timing purposes as the motor’s magnetic fields change under load or at speed; that’s where Sensorless operation shines.
       
    • Sensorless is also just more dependable. There are fewer wires and connections that need to survive the incredibly rough treatment most RC cars and trucks endure.

    Some guys do need sensored operation, mainly because the racing world’s rules require it, but also because it can offer slightly better start up and braking performance. Mamba Max Pro offers the ultimate in flexibility: use it with all your 1/10th motors, sensored or sensorless!

    I’m over the shock of the sensor port. Tell me what else you’ve packed into the Mamba Max Pro.

    • 6S (25.2 volts) max input voltage
       
    • Switching BEC powers your radio and servo all the way up to the 6S max input. Users may select the output for any voltage between 5V and 7V.
       
    • Durable case and cooling fan to protect and cool the controller during hard off-road action
       
    • Ready to Run: Mamba Max Pro is ready to run out of the box.
       
    • Castle Link Compatible: Like all Castle controllers, the Mamba Max Pro may also be “tuned” for the drivers’ preferences in the throttle curve, brake strength, reversing modes and more. Access these features with the CASTLE LINK USB connector (available separately) and a PC for even more versatility.

    Mamba Max Pro is available individually for $149.00 or in combos with Castle’s top quality CM36 4600kv, 5700kv, 6900kv, 7700kv, or 9000kv 36mm brushless motors for only $229.99.

    Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

    Price: $119.99
    132.10 CAD | 71.38 GBP | 86.61 EUR
    Add to cart

    Castle Creations 1/10 Sidewinder ESC w/5700 Motor

     

    Are you ready for a Sidewinder Grin?
    Finally, affordable brushless power for the people! Castle’s new Sidewinder brushless ESC series slashes the brushless price barrier while it blasts across the track in all 1/10th scale applications. Sidewinder is a great first high-performance package; it will provide more power and grins than most guys (and cars) can handle!

    Price: $100.00
    110.09 CAD | 59.49 GBP | 72.18 EUR
    Add to cart

    Tekin Hotwire Interface

     

      This is the Team Tekin Hotwire Interface.
               This allows you to set your ESC up through a PC interface

    FEATURES: The HotWire PC Interface unlocks the full potential of your
               Speed Control. Use the HotWire to connect your Speed
              Control to your PC or laptop and you can leverage the
               processing power of your computer to fine tune the
               performance characteristics of your Speed Control.
              The HotWire also gives access to custom user settings
               that are not available through the Speed Control's on-board
               interface and lets you network with other users to share
               tweaks, tuning tricks and entire track/condition specific
               profiles. Best of all the HotWire lets you download
               completely new software as it is developed and upload
               it to your Speed Control -- you get unrestricted access
               to upgrade your Speed Control to Tekin's latest and newest
               performance mods!

    INCLUDES: One Tekin Hotwire Interface
              One Installation Disk
              One Instruction Manual
              One USB Cable

     

    Price: $31.99
    35.22 CAD | 19.03 GBP | 23.09 EUR
    Add to cart

    Speed controller heatsink - cnc machined

     

    Perfect match for the Quark speed controller. Shown to dramatically reduce operating temps in conjunction with heat transfer compound and fans - play all day!

    Price: $30.00
    33.03 CAD | 17.85 GBP | 21.65 EUR
    Add to cart

    Castle Creations Field Programmer

     

    Programs your controllers without a computer (mostly).
    Works as a standard Castle Link USB adapter with your computer.

    Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but...  there has to be a better way. Now there is Field Link!

    Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. Can't get any easier!

    But wait! Act now and we'll throw in Castle Link USB compatibility too! That's right, these cards are also Castle Links that give you access to the entire world of Castle tuning functionality.

    Does it work without a computer or not?
    Yes, mostly. The card is programmed to work with the latest controllers and software when it leaves the Castle workshop. It will work with all Castle Link compatible controllers running software released since 2007. Go to www.castlecreations.com for more details. There is always a chance that we will upgrade the controller firmware down the road and that upgrade may require that the Field Link be upgraded too. That is easily accomplished, but it will require a computer running the latest version of Castle Link that is always available for free on the Castle website. We’ll also be happy to upgrade it for you if you drop it in the mail to us.

    You see, there are actually two Field Link cards, as no car guy wants to set heli governor gain, and no glider guy cares about forward reverse lockout. So select the card you need below.

    :
    Price: $25.49
    28.06 CAD | 15.16 GBP | 18.40 EUR
    Add to cart

    MGM Black Box BB_03

     

    Measuring recorder Black Box BB_03 is an outstanding and unique system which is priceless and irreplaceable for optimal setting of your power unit and for an overall optimal drive setting (including batteries, controller, motor and propeller).

    BB_03 cooperates very closely with speed controllers of range Z-series from which it obtains whole range of measured data. Part of the measured data is acquired using its own measuring unit. Thanks to this cooperation BB_03 is very small, light (> 6 grams) and also cheap.

    It measures and saves all important data of your drive (batteries - controller - motor - propeller) during flight, thus real values in operation, not static values measured on a test bench. This allows the user not only to optimize the power unit but also to determine mutual dependencies such as dependence of current on propeller, efficiency of drive on propeller, efficiency of timing, real power consumption of the drive, power consumption depending on type of cells (their hardness), etc.

    It is a powerful device for determining the real load of BEC during operation of the model (it is the end of absurd evaluations with 300% error leading to destruction of BEC or the model).

    After the flight the saved data are transferred to PC using USBCOM module, where they can be evaluated. Data are represented in graphs, as well as in excel tables which may be further processed.


    Technical data
    Dimensions 30×26×4 mm 1.181×1.024×0.158 in
    Weight 3.3 g 0.106 oz
    Weight with connection cables and sensors < 6 g < 0.193 oz
     
    Current drawn during measuring and saving 12 mA
    Operation temperature 0°C to 40°C
    Resolution 8 and 10 bits
    Length of recording 16 minutes
    Saving period 0.1 sec
    Fed from and cooperation with "Z-series" controllers

     

      BB_03 together with controllers of range Z-series measures and saves each 100ms these values:
    • voltage of the feeding (main) battery
    • voltage of feeding battery under load (in current pulses)
    • current drawn from the feeding battery
    • voltage of BEC
    • current of BEC
    • motor revolutions
    • throttle stick position
    • temperature of the controller
    • temperature of batteries, motor, … (external sensor)
    • any receiver channel (or event marking)
    • external voltage (5V) with an additional resistor 24kW, voltage 25V with different resistor or more
      Other features:
    • accidental overwriting of saved data protection
    • length of recording more than 16 minutes
    • very small and light
    • fed from controller
    • communication with PC using USBCOM module
      Measurement of the following data are carried out by the controller, the other ones are measured by BB_03 itself and all data are processed in BB_03:
    • voltage of the feeding battery
    • voltage of feeding battery under load (in current pulses)
    • voltage of BEC
    • current of BEC
    • motor revolutions
    • throttle stick position
    • temperature of the controller

    The BB_03 is connected with the controller using multicore cable CC_01 with micro connectors. The cable provides the BB_03 feeding, as well as communication between BB_03 and the controller.

    The measuring and data saving process start when the motor starts to rotate after switch on or when marking signal > 1.65 ms. If you do not wish to use the marking feature, connect this measuring wire with ground (minus pole of the feeding cells). It is also possible to use this wire for tracking and recording of any receiver channel.

    The current of the feeding batteries is taken on the resistor of the ground wire of the controller. This measuring method, even though less accurate than the use of accurate sensing resistor, is not only cheaper, but more significantly it does not bring any additional (unwanted) resistor in the circuit. Another great advantage is that the value of the measured current is not limited (e.g. by the sensing resistor, its allowed load, ADC range, etc.) thus it is possible to measure current of 250A or even more.


     

      The package includes:
    • The measuring unit BB_03
    • Connection cable controller - BB (CC_01)
    • Cable for connection to USBCOM (CC_02)
    • Measuring cable includes:
      • External temperature sensor
      • External voltage conductor
      • Marking conductor
      • Conductors of batteries current (current sensing)
    • Resistor 24kW for extending the measuring range of the "ext. voltage"
    • SW for PC
    • Instructions for connecting and use of BB_03
    • Instructions for installation and use of SW for PC
    Price: $25.00
    27.52 CAD | 14.87 GBP | 18.05 EUR
    Add to cart

    Castle Creations Switching BEC

     

    Our Battery Eliminator Circuits are small devices that eliminate the need for a receiver and servo battery pack. They draw higher voltage from the motor batteries and drop it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.

    NOTE: CC BEC Pro should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit.

     
    CC BEC Specs CC BEC Pro Specs
     
     
     
     
    Retail Price
    $24.95
    $44.95
    Item Number
    010-0004-00
    010-0004-01
    Length
    1.2" (30mm)
    1.69" (43mm)
    Width
    0.6"
    (15mm)
    1.3" (33mm)
    Height
    0.4" (10mm)
    0.94" (24mm)
    Weight
    0.4 oz* (11g)*
    1 oz* (29g*)
    Max Amps
    10 amps peak**
    <12 volts input = 7 amps**
    <24 volts input = 5 amps**
    20 amps peak**
     
    Max Volts
    5v to 25v
    2s to 6s LiPo
    Cars: 6s (25v)
    Airplanes: 10s (40v)
    Helicopters (with brake disabled): 12s (50v)
    Adjustable Output Voltage
    4.8V to 9 volts.
    4.8V to 12.5V
     
     
     

    *Weight without wires
    **Ratings are determined with a 5mph airflow on the BEC.


     

     

     

    :
    Price: $22.00
    24.22 CAD | 13.09 GBP | 15.88 EUR
    Notify when back in stock

    MGM usbCom+

     

    These modules are designed for communication of controllers MGM compro and some other devices (such as chargers, balancers etc.), with PC equipped with Operating systems Windows 2000 and Windows XP.

    Price: $20.00
    22.02 CAD | 11.90 GBP | 14.44 EUR
    Add to cart

    « Previous | 1 | 2 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase