This is the Team Tekin Hotwire Interface.
           This allows you to set your ESC up through a PC interface

FEATURES: The HotWire PC Interface unlocks the full potential of your
           Speed Control. Use the HotWire to connect your Speed
          Control to your PC or laptop and you can leverage the
           processing power of your computer to fine tune the
           performance characteristics of your Speed Control.
          The HotWire also gives access to custom user settings
           that are not available through the Speed Control's on-board
           interface and lets you network with other users to share
           tweaks, tuning tricks and entire track/condition specific
           profiles. Best of all the HotWire lets you download
           completely new software as it is developed and upload
           it to your Speed Control -- you get unrestricted access
           to upgrade your Speed Control to Tekin's latest and newest
           performance mods!

INCLUDES: One Tekin Hotwire Interface
          One Installation Disk
          One Instruction Manual
          One USB Cable

 

Measuring recorder Black Box BB_03 is an outstanding and unique system which is priceless and irreplaceable for optimal setting of your power unit and for an overall optimal drive setting (including batteries, controller, motor and propeller).

BB_03 cooperates very closely with speed controllers of range Z-series from which it obtains whole range of measured data. Part of the measured data is acquired using its own measuring unit. Thanks to this cooperation BB_03 is very small, light (> 6 grams) and also cheap.

It measures and saves all important data of your drive (batteries - controller - motor - propeller) during flight, thus real values in operation, not static values measured on a test bench. This allows the user not only to optimize the power unit but also to determine mutual dependencies such as dependence of current on propeller, efficiency of drive on propeller, efficiency of timing, real power consumption of the drive, power consumption depending on type of cells (their hardness), etc.

It is a powerful device for determining the real load of BEC during operation of the model (it is the end of absurd evaluations with 300% error leading to destruction of BEC or the model).

After the flight the saved data are transferred to PC using USBCOM module, where they can be evaluated. Data are represented in graphs, as well as in excel tables which may be further processed.

BB_03 together with controllers of range Z-series measures and saves each 100ms these values:
• voltage of the feeding (main) battery
• voltage of feeding battery under load (in current pulses)
• current drawn from the feeding battery
• voltage of BEC
• current of BEC
• motor revolutions
• throttle stick position
• temperature of the controller
• temperature of batteries, motor, … (external sensor)
• any receiver channel (or event marking)
• external voltage (5V) with an additional resistor 24kW, voltage 25V with different resistor or more

Other features:
• accidental overwriting of saved data protection
• length of recording more than 16 minutes
• very small and light
• fed from controller
• communication with PC using USBCOM module

Measurement of the following data are carried out by the controller, the other ones are measured by BB_03 itself and all data are processed in BB_03:
• voltage of the feeding battery
• voltage of feeding battery under load (in current pulses)
• voltage of BEC
• current of BEC
• motor revolutions
• throttle stick position
• temperature of the controller

The BB_03 is connected with the controller using multicore cable CC_01 with micro connectors. The cable provides the BB_03 feeding, as well as communication between BB_03 and the controller.

The measuring and data saving process start when the motor starts to rotate after switch on or when marking signal > 1.65 ms. If you do not wish to use the marking feature, connect this measuring wire with ground (minus pole of the feeding cells). It is also possible to use this wire for tracking and recording of any receiver channel.

The current of the feeding batteries is taken on the resistor of the ground wire of the controller. This measuring method, even though less accurate than the use of accurate sensing resistor, is not only cheaper, but more significantly it does not bring any additional (unwanted) resistor in the circuit. Another great advantage is that the value of the measured current is not limited (e.g. by the sensing resistor, its allowed load, ADC range, etc.) thus it is possible to measure current of 250A or even more.

The package includes:
• The measuring unit BB_03
• Connection cable controller - BB (CC_01)
• Cable for connection to USBCOM (CC_02)
• Measuring cable includes:
  • External temperature sensor
  • External voltage conductor
  • Marking conductor
  • Conductors of batteries current (current sensing)
• Resistor 24kW for extending the measuring range of the "ext. voltage"
• SW for PC
• Instructions for connecting and use of BB_03
• Instructions for installation and use of SW for PC

EOS Output Harness for Balance Charging 2S Car Packs such as ORION, TRAXXAS, CHECKPOINT

Fits EOS balance Chargers (EOS0403i, 0606i-x, 0610i-x) and LBA10. Battery-side has 4mm main bullet connectors, plus 2mm bullet for balance port on battery.

Because long wires and extra connectors in the balance circuit can potentially reduce accuracy of charging and balancing, this harness in made to connect directly to the Balance Port on Hyperion balance chargers. However, if you prefer (or need the extra length) you may use the Hyperion multi-adapter which came with your EOS charger and plug the HP-LB10-CAR balance connector into the 6S port on the Hyperion multi-adapter.

If you have a charger which can charge 3.7v LiPo batteries, but does not have a balancer built in, you can use a Hyperion LBA10 Balancer between your charger and the EOSOUT-CAR02 harness, to balance charge your 2S Car pack.

4 female Dean's Ultra plugs.

In connection with USBCOM++ provides SW updates through internet in MGM compro controllers and also provides to connect chargers AQCB - xxx with USBCOM++ and also CM_3 module with USBCOM++.

NEW! Multi-Adapter Balancer Harnesses for EOS LBA10 and Hyperion 400-600 series Balance Chargers, 2S to 6S via one Harness! Available in Versions for All Lipoly Pack Major Brands.

DOES NOT INCLUDE CABLE. USE CABLE THAT WAS SUPPLIED WITH MULTI ADAPTERS THAT CAME WITH THE CHARGER. (NOTE: These cables are NOT included with the Hyperion 1210I charger!)

IF YOUR CHARGER DID NOT COME WITH A MULTI ADAPTER YOU WILL NEED THE HYPERION MULTI-ADAPTER EXTENDER HP-LB10-EXT

NEW! Multi-Adapter Balancer Harnesses for EOS LBA10 and Hyperion 400-600 series Balance Chargers, 2S to 6S via one Harness! Available in Versions for All Lipoly Pack Major Brands.

DOES NOT INCLUDE CABLE. USE CABLE THAT WAS SUPPLIED WITH MULTI ADAPTERS THAT CAME WITH THE CHARGER. (NOTE: These cables are NOT included with the Hyperion 1210I charger!)

IF YOUR CHARGER DID NOT COME WITH A MULTI ADAPTER YOU WILL NEED THE HYPERION MULTI-ADAPTER EXTENDER HP-LB10-EXT

NEW! Multi-Adapter Balancer Harnesses for EOS LBA10 and Hyperion 400-600 series Balance Chargers, 2S to 6S via one Harness! Available in Versions for All Lipoly Pack Major Brands

DOES NOT INCLUDE CABLE. USE CABLE THAT WAS SUPPLIED WITH MULTI ADAPTERS THAT CAME WITH THE CHARGER. (NOTE: These cables are NOT included with the Hyperion 1210I charger!)

NEW! Multi-Adapter Balancer Harnesses for EOS LBA10 and Hyperion 400-600 series Balance Chargers, 2S to 6S via one Harness! Available in Versions for All Lipoly Pack Major Brands

DOES NOT INCLUDE CABLE. USE CABLE THAT WAS SUPPLIED WITH MULTI ADAPTERS THAT CAME WITH THE CHARGER. (NOTE: These cables are NOT included with the Hyperion 1210I charger!)

  These are the Female Traxxas Connectors Plugs Only (No Wires).
 

FEATURES: Shrouded wire connections (no shrink tube required)
          Wide surface area, gold-plated terminals
          Reverse polarity protection makes it impossible to connect backwards
          Textured surface for easy gripping
          Compatible with high-current 12-gauge wire
          Secure, positive locking spring loaded terminals for consistent
            contact
          Multiple locking barbs keep terminals secure
 

INCLUDES: Two black female plastic connectors
          Two sets of gold metal pins
          Instruction sheet
 

REQUIRES: Soldering wires to the metal pins
 

If you want something done right, you usually have to do it yourself. We were never totally satisfied with the options for bullet connectors for our high power applications, so we designed and manufactured our own. CC Bullets make the connection, every time. Simple as that.

The all-new Traxxas High-Current connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patent-pending Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas connectors maintain their precision feel and incredibly low resistance.

These are the Male Traxxas Connectors Plugs only (No Wires).
 

FEATURES: Shrouded wire connections (no shrink tube required)
          Wide surface area, gold-plated terminals
          Reverse polarity protection makes it impossible to connect backwards
          Textured surface for easy gripping
          Compatible with high-current 12-gauge wire
          Secure positive locking spring loaded terminals for consistent
            contact
          Multiple locking barbs keep terminals secure
 

INCLUDES: Two black male plastic connectors
          Two sets of gold metal pins
          Instruction sheet
 

REQUIRES: Soldering wires to the metal pins
 

Includes a male connector, female connector and heatshrink. Low resistance plug used for building battery packs. remove the stock plugs and replace them with these for more power!

These are the needed Gold plugs for plugging in the Lehner motors. "1" item includes 3 male and 3 female plugs.