Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Manufacturers » Traxxas

 Checkout
SortNumberSearch

« Previous | 1 | 2 | 3 | »

Aluminum EMaxx Chassis - VMaxx
Manufacturer: RC Monster

 

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks.  As the first offering for our "Victory" series, the goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were driving forces for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - maximum total ground clearance is achieved, while center of gravity is significantly lower than stock. The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller packs. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Nearly identical to the stock chassis weight with all like components installed(battery holders on stock chassis, trays, screws and straps on V-Maxx chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining high center ground clearance and the legendary Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length -  chassis braces included with the chassis.
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if we get enough requests, we should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Removable transmission mounts - the separate, bolt-in tranny mounts locate the transmission in its stock location, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
Price: $150.00
193.26 CAD | 113.54 GBP | 132.86 EUR
Add to cart

T-Maxx/E-Maxx Front Hybrid Bulkhead from FastLane Machine

 

 

 

 

 

 

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Increases strength to entire bulkhead section
  • This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches)
  • Diff case and bulk are machined into one unit
  • Includes lower arm pin

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

  •  

     

    Price: $75.00
    96.63 CAD | 56.77 GBP | 66.43 EUR
    Add to cart

     
    Slayer CVD kit
     

    CVD kit for Traxxas Slayer - Includes 4 cvds - enough for one complete truck.

    Price: $75.00
    96.63 CAD | 56.77 GBP | 66.43 EUR
    Add to cart

    Slash 4X4 Motor Mount Kit

     

    Slash 4X4 Motor Mount Kit

     

     

     

     

     

     

     

  • Made in the USA
  • Motor mount machined from billet 6061 aluminum
  • Diff cup machined from billet 7075 aluminum
  • Increased bearing to a 10x19x5 for durability
  • Eliminates bearing failure
  • Retains stock slipper set up as an option
  • Direct replacement
  • Includes all necessary hardware

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

     

     

     

  •  

    Price: $57.00
    73.44 CAD | 43.14 GBP | 50.48 EUR
    Notify when back in stock

    Stampede Extended 1/8 Super Chassis

     

     

     

     

     

     

     

     

     

     

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Stock replacement
  • 8.25mm thick
  • 50.8mm longer than stock
  • Includes all necessary mounting hardware

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    This item not eligible for flat rate shipping.

     

     

     

     

  •  

     

     

    Price: $53.00
    68.29 CAD | 40.12 GBP | 46.94 EUR
    Add to cart

    Front and Rear Axle Upgrade Kit - Slash 4x4

     

    FLM24300 - Slash 4x4 Axle Upgrade Kit

     

     

     

     

     

     

     

  • Machined from high strength alloy steel
  • Heat treated for maximum strength
  • Kit replaces both front and rear axles
  • Lifetime warranty

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

     

     

     

  •  

     

    Price: $50.00
    64.42 CAD | 37.85 GBP | 44.29 EUR
    Add to cart

    Silver aluminum Castor and steering block set - Slash, Rustler, stampede, bandit

     

     Silver aluminum castor blocks and steering blocks/knuckles for Slash, Stampede, Rustler and Bandit vehicles from Traxxas.

    List Price: $60.00
    You save $10.00
    Price: $50.00
    64.42 CAD | 37.85 GBP | 44.29 EUR
    Add to cart

    Slash 4x4 Front CVD

     

    Slash 4x4 Front CVD
     
  • Machined from high strength alloy steel
  • Heat treated for maximum strength
  • Stock replacement
  • Lifetime warranty
  • Direct bolt on
  •  

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    Price: $48.00
    61.84 CAD | 36.33 GBP | 42.51 EUR
    Add to cart

    Slash 4X4 HD Motor Mount

     

     

     

     

  • Made in the USA
  • Machined from billet 6061 aluminum
  • Direct replacement
  • Uses a 10 x 19 x 5 bearing
  • Includes bearing spacer (for slipper gear) and bearing

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

  •  

    Price: $36.00
    46.38 CAD | 27.25 GBP | 31.89 EUR
    Notify when back in stock

    Silver Aluminum Front bulkhead - Slash, Stampede

     

    Price: $35.00
    45.09 CAD | 26.49 GBP | 31.00 EUR
    Add to cart

    Traxxas Differential Kit E-Revo

     

            This is the Differential Kit for the Traxxas E-Revo and E-Maxx.
     


    FEATURES: Direct drop-in for E-Revo and E-Maxx
              Transfers power to the front and rear differentials independently
              Comes assembled with 500K oil
              For single speed transmission only
     


    INCLUDES: One differential kit
     


    REQUIRES: Installation on E-Revo or E-Maxx
     

    Price: $34.99
    45.08 CAD | 26.48 GBP | 30.99 EUR
    Notify when back in stock

    Traxxas Revo Center Differential Kit

     

    This is the Traxxas Center Differential Kit for the Revo.

    Price: $34.99
    45.08 CAD | 26.48 GBP | 30.99 EUR
    Add to cart

    Baja Wheel adapters for Traxxas X-Maxx

     

    Flanged wheel hex sized to fit the HPI Baja and similar 1/5 wheels onto the Traxxas X-Maxx truck. CNC machined from 6061 billet aluminum for strength and precision. Integrated 17mm hex, threaded through for superior strength and holding power, and an extended boss to fit and locate the inside of standard 1/5 wheels to the 17mm X-Maxx axle. Design also works perfectly on stock wheels, adding style and holding power. 

    Listing includes 1 complete set of 4 hex adapters. 

    Price: $32.00
    41.23 CAD | 24.22 GBP | 28.34 EUR
    Add to cart

    Slash 4x4 Front Axle Upgrade

     

    Slash 4x4 Front Axle Upgrade

     

     

     

     

  • Machined from high strength alloy steel
  • Heat treated for maximum strength
  • Replaces front axle and connects to telescoping shaft
  • Lifetime warranty

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

     

  • Price: $30.00
    38.65 CAD | 22.71 GBP | 26.57 EUR
    Add to cart

    « Previous | 1 | 2 | 3 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase